Eco Epoxy Shield has very high adhesion to most surfaces coupled with high gloss and film build with good wear resistance which makes for aesthetically pleasing functional heavy-duty coated surfaces.
USES
- Decorative flake system base coat (when pigmented) and build coat.
- Art décor floor surface for residential and commercial
- Factory floors
- Retail stores
- Automotive showrooms
- Binder for non-slip particulate surfaces
- Laboratories
ADVANTAGES
- High film build from 100% solids, wet film thickness equals dry film thickness
- High transparency and film clarity
- Suitable for interior and exterior use (pigmented or filled for exterior)
- Adheres well to a wide variety of surfaces
- Good chemical resistance (see following table)
- Water resistant
- Good durability and wear resistance
- Simple to mix 2:1 ration of resin to hardener
- Can be coloured with Eco Epoxy Shield Colour Paste
- Nominal cure approximately 24 hours at 20°C and 65% RH for 200 micron, 5m² per litre film thickness on glass. For cold temperatures, cure time 48 hours at 10°C. Full hardness development over 7 days
- Can be overcoated with Carbon Coat or Eco Sparta Shield
Standard colour range is as follows:
-
- B64 – Charcoal
- N14 – White
- N23 – Neutral Grey
- N35 – Light Grey
- N43 – Pipeline Grey
- N45 – Koala Grey
- N61 – Black
- N64 – Dark Grey
- Y56 – Merino
COVERAGE
One coat will cover approximately 1 – 5 square metres per litre, depending on application tool.
