DMS 240 is an electric drill motor and stand system for a huge variety of core drilling applications. It is the most powerful system in our drill motor stand range. An ideal system for medium core drilling in walls, floors and roofs up to 250 mm diameter. The stand is easy to tilt, the back support provides reliable and stable angle drilling, saving you setup time and body stress. This system can be used for drilling ventilation and plumbing channels, waste evacuation pipes as well as barrier and road signs.
| Specifications | |
|---|---|
| MOTOR | |
| Rated input power | 2.4 kW |
| Rated current | 10 A |
| Frequency | 50 Hz |
| Voltage | 220-240 V |
| Phases | 1 ph |
| Power source | Corded |
| DRILLING EQUIPMENT | |
| Recommended drill bit diameter, min | 0 mm |
| Drill bit diameter, max | 250 mm |
| Coolant | Wet |
| TRANSMISSION | |
| Number of gearbox speeds | 2 |
| SPECIFICATIONS | |
| Water connector | G 1 / 4″ |
| Water pressure, max | 8 bar |
| Spindle thread, inner | G 1/2″ |
| Spindle thread, outer | 1 1/4″ 7 UNC |
| Column’s angling | 0-60º |
| Column installation | Tiltable |
| DIMENSIONS | |
| Product size length | 545 mm |
| Product size width | 266 mm |
| Product size height | 1,052 mm |
| Weight | 20.4 kg |
